Grepper code

Grepper

A cool tool.

Please add a copy feature so that I can copy the long answers
in a single click for my notes.

Thank you.

Grepper

GREPPER IS THE BEST!

Grepper

give a like if grepper has made your life easier

Grepper code

SQL – How To Check If A String Contains Numbers
NOVEMBER 19, 2009 ROB BAMFORTH2 COMMENTS
Use the PATINDEX function to check for an integer value continued in the string.

If PATINDEX returns a value greater than 0 then the string does contain an integer, you can use PATINDEX to determine the position of the integer within the string.

If PATINDEX is not greater than zero then the string does not contain an integer value.

DECLARE @string varchar(50)
SET @string = ‘this is a string with numb3rs in it’

IF PATINDEX(‘%[0-9]%’,@string) > 0 
      PRINT ‘YES, The string has contains the number ‘ +
                  substring(@string,PATINDEX(‘%[0-9]%’,@string),1) +
                  ‘ at position ‘ +
                  cast(PATINDEX(‘%[0-9]%’,@string) as char)
ELSE 
      PRINT ‘NO, The string does not have numbers’

Grepper code

/*
  WiFiAccessPoint.ino creates a WiFi access point and provides a web server on it.

  Steps:
  1. Connect to the access point "yourAp"
  2. Point your web browser to http://192.168.4.1/H to turn the LED on or http://192.168.4.1/L to turn it off
     OR
     Run raw TCP "GET /H" and "GET /L" on PuTTY terminal with 192.168.4.1 as IP address and 80 as port

  Created for arduino-esp32 on 04 July, 2018
  by Elochukwu Ifediora (fedy0)
*/

#include <WiFi.h>
#include <WiFiClient.h>
#include <WiFiAP.h>

#define LED_BUILTIN 2   // Set the GPIO pin where you connected your test LED or comment this line out if your dev board has a built-in LED

// Set these to your desired credentials.
const char *ssid = "yourAP";
const char *password = "yourPassword";

WiFiServer server(80);


void setup() {
  pinMode(LED_BUILTIN, OUTPUT);

  Serial.begin(115200);
  Serial.println();
  Serial.println("Configuring access point...");

  // You can remove the password parameter if you want the AP to be open.
  WiFi.softAP(ssid, password);
  IPAddress myIP = WiFi.softAPIP();
  Serial.print("AP IP address: ");
  Serial.println(myIP);
  server.begin();

  Serial.println("Server started");
}

void loop() {
  WiFiClient client = server.available();   // listen for incoming clients

  if (client) {                             // if you get a client,
    Serial.println("New Client.");           // print a message out the serial port
    String currentLine = "";                // make a String to hold incoming data from the client
    while (client.connected()) {            // loop while the client's connected
      if (client.available()) {             // if there's bytes to read from the client,
        char c = client.read();             // read a byte, then
        Serial.write(c);                    // print it out the serial monitor
        if (c == '\n') {                    // if the byte is a newline character

          // if the current line is blank, you got two newline characters in a row.
          // that's the end of the client HTTP request, so send a response:
          if (currentLine.length() == 0) {
            // HTTP headers always start with a response code (e.g. HTTP/1.1 200 OK)
            // and a content-type so the client knows what's coming, then a blank line:
            client.println("HTTP/1.1 200 OK");
            client.println("Content-type:text/html");
            client.println();

            // the content of the HTTP response follows the header:
            client.print("Click <a href=\"/H\">here</a> to turn ON the LED.<br>");
            client.print("Click <a href=\"/L\">here</a> to turn OFF the LED.<br>");

            // The HTTP response ends with another blank line:
            client.println();
            // break out of the while loop:
            break;
          } else {    // if you got a newline, then clear currentLine:
            currentLine = "";
          }
        } else if (c != '\r') {  // if you got anything else but a carriage return character,
          currentLine += c;      // add it to the end of the currentLine
        }

        // Check to see if the client request was "GET /H" or "GET /L":
        if (currentLine.endsWith("GET /H")) {
          digitalWrite(LED_BUILTIN, HIGH);               // GET /H turns the LED on
        }
        if (currentLine.endsWith("GET /L")) {
          digitalWrite(LED_BUILTIN, LOW);                // GET /L turns the LED off
        }
      }
    }
    // close the connection:
    client.stop();
    Serial.println("Client Disconnected.");
  }
}

Grepper code

select CITY, length(CITY) from STATION
order by length(CITY),city asc
limit 1;
select CITY, length(CITY) from STATION
order by length(CITY) desc
limit 1;

-2

Similar codes

1 vote359 views1 answer
Select count distinct multiple columns sql server
SQL
1 vote393 views1 answer
Nullif postgresql
SQL
0 vote342 views1 answer
Postgres full text search example
SQL
0 vote368 views1 answer
Search In the Database using Text
SQL
13 votes381 views3 answers
Insert mysql ifile nto database
SQL
0 vote364 views1 answer
Difference between 2 query results sql server
SQL
0 vote346 views2 answers
Postgresql get last day of month
SQL
0 vote339 views2 answers
Mysql password error create datbase
SQL
0 vote401 views1 answer
Mysql workbench format date
SQL
10 votes366 views4 answers
Drop primary key
SQL